Specify the time from 〈PAUSE〉 to 〈STANDBY〉 transition.
Transition to 〈STANDBY〉 state when standby time elapses in 〈PAUSE〉 state.

setting value	description
0000H	180 seconds (3 minutes) …… Initial value
003CH-0384H (60-900)	Transition time (in seconds) …… 60-900 seconds ( 1 to 15 minutes) (Minimum value: CDC_STNBY_MIN, Maximum value: CDC_STNBY_MAX)
FFFFH	Do not change settings (CDC_PARA_NOCHG)

(4) ECC count

∙ Specify the number of ECC processing (PQ correction once) for CD-ROM decoding.

setting value	description
00H	ECC is processed only once in real time …… Initial value
01H to 05H	Maximum number of repetitions when there is an error after ECC processing (total 2 to 6 times)
80H	No ECC processing
FFH	Do not change settings

(A) Applies to Mode1 or Form1 sectors.
(B) When bit2 = 1 of initialization flag (Mode2 subheader is not recognized), Mode2 ECC processing is not performed.