format  Sint32 CDC_ResetSelector (Sint32 rflag, Sint32 bufno)
 Input  rflag: Reset flag (lower 8 bits are valid)
:  bufno: Buffer partition number
 Output  None
 Function value  Returns an error code.
 End flag  ESEL flag
 Function  Initializes the selector setting state according to the reset flag value.
: -When reset flag = 0: All data in the specified buffer section is deleted.
: -Reset flag ≠ 0: The buffer partition number is ignored. 

 
  (1) Reset flag  


 (2) Initial value  

Initialization sets the following initial values ​​for all selectors.
-Buffer partition data: All will be erased. (All data in the CD buffer is erased.)
-Partition output connector: All are unconnected.
-Aperture condition: Same as initialization in aperture mode setting (CDC_SetFiltMode).
-Aperture input connector: All are unconnected.
-True output connector: The same number of apertures and buffer sections are connected.
・ Fake output connector: All are disconnected.