Return to previous page ｜ Return to menu ｜ Go to next page
● Hardware / Software required for each system
| SIMM | SCSI |
Basic program development tools | ○ | ○ |
Target box | ○ | ○ |
IBM PC compatible | - | ○ |
File system | ○ | ○ |
MFCAT | ○ | − |
CDSIM | - | ○ |
Note: Even if the PC environment is used with the basic program development tool, it is for the SCSI system.
Please prepare an IBM PC compatible machine separately.
■ Hardware setup
The hardware setup procedure is shown below.
● Simple CD simulator / SIMM system
(1) Target preparation
When not using the SCSI system, set SW2-4 of the DIP switch to OFF.
(2) Power on
Use it after executing BOOT ROM.
● Simple CD simulator / SCSI system
1 Set DIP switch 2 as follows.
2 Confirm that the ICE emulation memory is not mapped.
Return to previous page ｜ Return to menu ｜ Go to next page