How to start and stop

  Startup  

 1  Start [mfcat.exe] from the DOS prompt.
 

The following display will appear.
 

 Exit  

It will end automatically. 

  Startup  

 1  Start [cdsim.exe] from the DOS prompt.
 

The following display will appear.
SUN startup example (when PORT-A / SCSI ID 2 is used)
CDSIM -i / dev / ttya -o / dev / rsd2a (CR) 

HP startup example (when using PORT-0 / SCSI ID 5)
CDSIM i / dev / tty00 -o / dev / dsk / c201d5s0 (CR) 

 

 Exit  

Ending with error automatically.
If it does not end automatically, press the [ESC] key.
In case of SUN or HP, press [CTRL] + [C] to exit. 

● Confirm installation

To confirm that the installation was successful, make the necessary settings, start the software, check the copyright display, and exit.