Error caused by relationship between host machine and CD-R recorder

Error when transferring CD image

The following error message means that the I / O speed of the host hard disk is not in time for the writing speed of the CD-R writer. Use command options to adjust the CD-R writing speed.

□Buffer Under Run

CD-R recording device setting error

The following error message occurs when an invalid value is specified for the writing speed. Use option -s to specify the correct writing speed.

□Error:Bad speed value

The following error message appears when the CDR100 firmware version is out of date and the SEGA Saturn CD cannot be created. Update the CDR100 firmware to the correct version.

□Firmware upgrade of CD recorder is needed to use this software.

Error returned by CD-R recorder

The following error is returned by the CD-R recorder.

□Unknown sense key
□Unknown additional sense code
□Field Replaceable Unit failed
□Number of Errors
□Error Number [%d] at Logical Block Address
□No Additional Sense
□Caddy Out
□Drive Not Ready
□Communication Failure
□Track Following Error
□Unrecovered Read Error
□Positioning Error
□Recovered Read Data With Retries
□Recovered Read With ECC Correction
□Parameter List Length Error
□Invalid Command
□Invalid Block Address
□Illegal Field in Command Descriptor
□Invalid LUN
□Invalid Field Parameter List
□Medium Changed
□Power-on Reset or Bus Reset Occurred