(12) Coding information in the subheader is set using the CodingInformation command.
. Virtual CD determines from the file source type and sets coding information
   this is not allowed. However, in MpegMultiplex, specify the data type as VIDEO in the MpegStream line.
If specified as OFH, AUDIO, it will be set to 7FH.
* Coding information is not stipulated in GAME-CD. Also described in (11)
There are no setting values ​​for AUDIO and MPEG_VIDEO. Note that the AUDIO sector source is ADPCM.
For the setting value when the source of the video sector is ASM or EVM, see 4.3.2.4 of CD-ROM XA II.4.
   Please to query. 

(13) A new MpegFlush command has been added as a command keyword. Write an MpegFlush line
, And 16KBytes “0” immediately before the sequence_end_code recorded at the end of the MPEG video stream.
Add data. 

    :: = MpegFlush [CR]  
 :: =  |  |  |
 |  |  |
 |  |  |
:  |  |  |
 |  |      
 

(14) In the MPEG stream definition, if the data type specified in the MpegStream line is DATA, the DataType line
FORM1 / FORM2 must be specified by. 

  :: =        
 |  
      
 
 

(15) Relative position specified in minutes: seconds: frame can also be specified by FAD. 

 :: = : :  | 
 :: =  

(16) Option specification for VCDPRE.EXE and VCDBUILD.EXE can be used as a delimiter and-
. An option has also been added. 

  Format 
VCDPRE startup file [/ i / c / d / f / a]
Or
VCDPRE startup file [-i -c -d -f -a]
 Additional options 
/ A or -a Specify options i, c, d and f at once.
 Format 
VCDBUILD startup file [/ i / c / d / f / a / n / s]
Or
VCDBUILD startup file [-i -c -d -f -a -n -s]
 Additional options 
/ N or -nECC not generated
/ S or -s Hide progress during execution