> opt Destination (s) 

opt: Store option. Any one of {S1 / S2 / S3} or omitted.
Destination (s): Specify the store destination. Select a total of 1 or more from “a group to d group” shown below. Cannot be omitted. 

a group	One of {TEMP00 to 7F}
b group	FREG
c group	ADREG
d group	One of {EFREG00 ~ 0F}

  Note  When ADREG is specified for Destination (s), S3 must be specified for opt
  

• opt specifies the bit shift, overflow protection, and store mode of the data to be stored. The combinations are shown in the table below.

First parameter setting	Shift	Overflow protection	Store mode
omitted	× 1	protected	A
S1	× 2	Protected	A
S2	× 2	Unprotected	A
S3	× 1	Unprotected	B

The data stored in ADREG and FREG differs as shown in the table below, depending on the store mode A / B.

Mode / Register Name	ADREG (12bits)	FREG (13bits)
A	ssss INPUTS bit23-bit16	Shifter bit23-bit11
B	shifter bit23-bit12	0 shifter bit11-bit0

* Upper 4 bits of ADREG / Store Mode A (	ssss	) is equal to INPUTS bit23
Filled with value (sign bit) (sign extended).