Development environment

▲Programming BOX related: Q ) Power memory is not recognized by the Programming BOX.; Q ) I want to set the power memory to an uninitialized state.; Q ) About memory mapping when SIMM CART of Programming Box is turned on.; Q ) Regarding communication between the Programming Box and SCSI.; Q ) Regarding the programming box and PC settings.; Q ) The image output of Programming Box may become monochrome.

▲ICE/EVA board related: Q ) Even when IPI.EXE is started, "NO INTERFACE BOARD" is displayed and it cannot be used at all.

▲Hitachi Compiler/Debugger related: Q ) Which of SHCLIB.LIB, SHCPIC.LIB, and SHCNPIC.LIB should I link?; Q ) Are there any points to be careful about with SH C compiler options when developing Sega Saturn?; Q ) The source file does not appear in the file list in GUISH.; Q ) I would like to display 2-byte code characters such as kanji in the source code in GUISH.; Q ) When I start GUISH, the message "NO INTERFACE BOARD" is displayed.; Q ) I want to use GUISH to debug both master and slave.

▲Cartdev + DevSATURN environment: Q ) What is CartDev?; Q ) How to run a program that accesses a write-once CD in CartDev environment?; Q ) PowerMemory is not recognized from the debugger in CartDev+DevSaturn.; Q ) Direct DOS access or reading from a disk image is not possible with VCD.; Q ) How to run a sample that self-starts from a virtual CD in CartDev+DevSaturn?; Q ) Where does the tail coming out from the back of DevSaturn connect?

▲GNU development environment: Q ) I want to use kanji with gcc.; Q ) Regarding the GNU assembly development environment.; Q ) When compiling with gcc, an error occurs in go32.; Q ) SBL cannot be compiled with gcc 3/28 version.; Q ) Even if I increase the optimization of gcc, the speed does not increase.; Q ) Is there any good way to dump the error list generated by gcc into a file?; Q ) I want to set sections for variables and functions.; Q ) I want to input long commands from the command line.; Q ) I want to use an inline assembler in a C function.; Q ) GCC returns the message "garbage at end of number".; Q ) I want to use a divider using gcc.; Q ) I want to write code in C++.; Q ) What are some efficient coding techniques?; Q ) I would like to display a correspondence table between source and assembly.; Q ) Which make should I use?; Q ) I want to create an original library.; Q ) What is gasm?; Q ) I get the error message "can't open blah: interrupted system call".; Q ) When I try to run LD on my PC, an error message saying "Not enough memory" appears.; Q ) The linker is slow.; Q ) I want to disassemble object files and COFF files.; Q ) I would like to view the symbol information of library files and COFF files.

▲SNASM related: Q ) I want to restart snbugsat with the memory contents intact after it hangs.; Q ) I would like to use the READ/WRITE cycle condition settings and history function in SNASM.; Q ) Does SNASM have a function to dump the contents of RAM into a coff file, etc.?; Q ) Please tell me how to read the SIMM address in a SNASM environment.; Q ) How to debug with SNASM?; Q ) I can't see inside the structure with SNASM.

▲VCD/simple CD simulator related: Q ) I would like to know more about the operating models of VCD.; Q ) Please tell me the operation procedure of VCD in CartDev+DevSaturn environment.; Q ) An error occurs when I run VCDBULID.; Q ) Regarding the operating environment of the simple emulator.; Q ) Is it possible to play Cinapak or CD-DA with a simple CD simulator?; Q ) How to use the simple CD simulator?; Q ) I want to use a simple SCSI system with SGL.; Q ) What are the conditions for using the simple SCSI system?; Q ) Regarding the operation of virtual CD (things you want to confirm); Q ) I installed Virtual CD on my PC and started VCDEMU.EXE, but it does not start properly.

▲XBAND: Q ) Only local mode starts.; Q ) I am developing with CartDev + DevSaturn, but it seems that the modem is not recognized.; Q ) I am conducting a server test with CartDev + DevSaturn, but it is not working properly.

▲Others: Q ) What are SBL and SGL?; Q ) Regarding the bin←→S28 converter.; Q ) Please tell me the specifications of S format.; Q ) Which PC do you recommend for development equipment?; Q ) addcdw does not work.; Q ) I want to make a copy of the Write Once CD.; Q ) What should I be careful about when porting from NTSC to PAL?; Q ) When I create a CD with a Yamaha writer, noise is mixed between the CDDA tracks.

★ FAQ