2.Module configuration

The module configuration as seen from the application is shown below.

Figure 2.1 Module configuration diagram

         ┌────────────────────────────────┐    
         │                                │    
         │          Application           │    
         │                                │    
         └────────────────────────────────┘    
                  ┏━━━━━━━━━━━━━┓              
         ┌───────┐┃┌───────────┐┃┌────────┐    
         │MPEG   │┃│Stream     │┃│File    │    
         │library│┃│system     │┃│system  │    
         │       │┃│library    │┃│library │    
         │       │┃│       ┌───┘┗┿━━━━━━━━┿┓   
         │       │┃│       │ ┌───┘  File  │┃   
         │       │┃│       │ │      system│┃   
         └───────┘┃└───────┘ └─────┐lower │┃   
        ┏━━━━━━━━━┛                │module│┃   
        ┃┌───────────────────────┐ │      │┃   
        ┃│   CD communication    │ │      │┃   
        ┃│       interface       │ │      │┃   
        ┃└───────────┬───────────┘ └──┬───┘┃   
Software┗━━━━━━━━━━━━┿━━━━━━━━━━━━━━━━┿━━━━┛   
━━━━━━━━━━━━━━━━━━━━━┿━━━━━━━━━━━━━━━━┿━━━━━━━━
Hardware             │                │        
              ┌──────┴─────┐   ┌──────┴────────┐ 
              │  CD block  │   │SIMM, SCSI file│ 
              └────────────┘   └───────────────┘ 
                                               
   ┏━━━┓                                       
   ┃   ┃are the modules required to use the stream system             
   ┗━━━┛                                       

To use the stream system library, you must link the file system, CD communication interface, DMA, and cache libraries.