function | ||||
---|---|---|---|---|
stomach | Peripheral ID data type | PerId | 1.1 | |
Peripheral size data type | PerSize | 1.2 | ||
Into back type | PerKind | 1.3 | ||
Number of required peripherals | PerNum | 1.4 | ||
System data output data type | PerGetSys | 1.5 | ||
Peripheral data output data type | PerGetPer | 1.6 | ||
Peripheral data output data type | PerMulInfo | 1.7 | ||
Device information | Digital device information data type | smpDgtData | 2.1 | |
Analog device information data type | smpAnlData | 2.2 | ||
Pointing device information data type | smpPntData | 2.3 | ||
Keyboard device information data type | smpKbdData | 2.4 |
function | Function name | number | Usage restrictions | ||
---|---|---|---|---|---|
Non | command | Master SH2 ON | PER_SMPC_MSH_ON | 1 | Do not use |
Slave SH2 ON | PER_SMPC_SSH_ON | 2 | -- | ||
Slave SH2 OFF | PER_SMPC_SSH_OFF | 3 | -- | ||
sound on | PER_SMPC_SND_ON | 4 | -- | ||
Sound OFF | PER_SMPC_SND_OFF | 5 | -- | ||
CD ON | PER_SMPC_CD_ON | 6 | Do not use | ||
CD OFF | PER_SMPC_CD_OFF | 7 | Do not use | ||
Whole system reset | PER_SMPC_SYS_RES | 8 | Do not use | ||
NMI request | PER_SMPC_NMI_REQ | 9 | -- | ||
hot reset enable | PER_SMPC_RES_ENA | 10 | -- | ||
Hot reset disabled | PER_SMPC_RES_DIS | 11 | -- | ||
SMPC memory settings | PER_SMPC_SET_SM | 12 | -- | ||
Time setting | PER_SMPC_SET_TIM | 13 | -- | ||
stomach | command | Into back initialization | PER_LInit | 14 | -- |
Peripheral data acquisition | PER_LGetPer | 15 | -- | ||
others | Get time | PER_GET_TIM | 16 | -- | |
System data acquisition | PER_GET_SYS | 17 | -- | ||
others | Get hot reset | PER_GET_HOT_RES | 18 | -- |