Japanese
★ PROGRAMMER'S GUIDE ★ P.S. Write Once
▲ Back | Forward ▼
P.S. Write Once System User's Manual 7. error
- If an error occurs, a message is output in the following format.
- Subcommand file name (line number): Error message [error code]
Error list
-
▲ List Drive not connected [fe02][fe82]
Drive is not connected
- Cause
- No CD-R drive is connected to SCSI.
- countermeasure
- Please make sure the connection and ID are not duplicated.
▲ List Drive not ready [fe04][fe28][fe50][fe5a][fea3][feb7]
Drive is not ready
- Cause
- CD-R drive
does not become a state.
- countermeasure
- Make sure the disc is set correctly.
▲ List There is a problem with the disk [fd0b][fe31][fe33][fea9][feaf][feb2][feb3]
Something wrong with the disc
- Cause The CD-R disc is abnormal.
- Countermeasure Check the specifications of the CD-R disc.
▲ List There is an error in the subcommand [fd12]
Bad Sub-command
- Cause
- An unsupported subcommand was specified.
- countermeasure
- Check subcommands.
▲ List File does not exist on disk [fd15]
File does not exist on the disc
- Cause
- The specified file does not exist on the CD-R disc.
- countermeasure
- Specify the correct file name with full path.
▲ List Directory does not exist on disk [fd14]
Directory does not exist on the disc
- Cause
- The specified directory does not exist on the CD-R disc.
- countermeasure
- Specify the correct file name with full path.
▲ List File does not exist on DOS [fd07][fd13]
File does not exist on DOS
- Cause
- The specified file does not exist on DOS.
- countermeasure
- Please check the file name.
▲ List File size is too large [fd1a]
File size is too huge
- Cause
- The file size specified in the system area is too large.
- countermeasure
- Reduce file size to 32768 bytes or less.
▲ List File is already marked for editing [fd17]
File is specified already
- Cause
- A subcommand was issued twice for the same file.
- countermeasure
- Check the subcommands.
▲ List The specified file is interleaved [fd1c]
Specified file is interleaved
- Cause
- You issued a subcommand that cannot be executed on a file that is interleaved.
- countermeasure
- Redo the disk build.
▲ List File already exists on disk [fd16]
Same file name exists on the disc already
- Cause
- The file you tried to add already exists on the CD-R disc.
- countermeasure
- Rename or replace the file.
▲ List Directory cannot be updated [fd1b]
Can't renew the directory
- Cause
- A subcommand was specified for a directory.
- countermeasure
- Fully updated.
▲ List Cannot create additional image file [fd1d]
Can't create the image file for the additional description
- Cause
- Unable to create file in specified working directory.
- countermeasure
- Please check your working directory. Check the free space on your hard disk.
▲ List Disk is full [feaa][feb0][feb4]
Disc is full
- Cause
- The write position has reached the end of the disk.
- countermeasure
- Use a new disk.
▲ List No more writing can be done to this disc [fd18]
Can't write on this disc any more
- Cause
- An attempt was made to write to a used disk in master mode.
Or you tried to write to a disc like this:
- Disc with 99 tracks written on it
- Discs written in master mode (disc at once)
- Disc with final session confirmed
- A disk whose session has not been closed (fixed)
- countermeasure
- Use new disk
▲ List Transfer speed is too slow [fead]
Forwarding Speed is too slow
- Cause
- The data buffer of the CD-R drive became empty during writing.
- countermeasure
- Slow down the write speed.
Use disk cache.
Free up more conventional memory by reducing device drivers, etc.
▲ List Gap size is too small [fd02][fd03]
Gap size is too small
- Cause
- Gaps between tracks are too small.
- countermeasure
- 225 sectors before the Mode2 track, 150 sectors or more in other cases.
▲ List There is an error in the TOC file [fd04][fd05][fd06][fd0a][fd10]
Something wrong with the TOC file
- Cause
- There is an error in the TOC file.
- countermeasure
- Use the correct TOC file.
▲ List Unable to access file [fd08]
Can't access the file
- Cause
- Failed to access file.
- countermeasure
- Check whether files and directories can be accessed normally.
▲ List Too many subdirectories [fd0d]
Too many sub-directories
- Cause
- Too many subdirectories.
- countermeasure
- Reduce the total number of subdirectories to 1024 or less.
▲ List There is an error in the DSK file [fd0c][fd0e][fd0f]
Something wrong with the DSK file
- Cause
- The contents of the DSK file do not comply with the ISO9660 standard.
- countermeasure
- Use the correct DSK file.
▲ List Disk contents are invalid [fd19][fe21]
Illegal disc contents
- Cause
- The contents of the CD-R disc do not comply with the ISO9660 standard.
- countermeasure
- Fully updated.
▲ List Out of memory [fd11][fec1]
Not enough memory
- Cause
- The memory capacity required for execution cannot be secured.
- countermeasure
- Free up more conventional memory by reducing device drivers, etc.
▲ List A read error occurred [fe11][fe17][fe18][fe32][fe47][fe57][fea0][fea2]
Read Error Occurred [feab][feac][feae]
- Cause
- A disk read error occurred.
- countermeasure
- Please check the CD-R disc.
▲ List A communication error has occurred [fd00][fe00]
Communication Error Occurred
- Cause
- An error occurred during communication.
- countermeasure
- Please check connections, cables, etc.
▲ List A hardware error has occurred [fe08][fe09][fe15][fe29][fe40][fe42][fe44]
Hardware Error Occurred [fe53][fe83][fec0]
- Cause
- An error has occurred in the CD-R drive.
- countermeasure
- Please check your CD-R drive.
▲ List Disk is empty [feb1]
Disc is empty
- Cause
- An attempt was made to add differential data to an empty disk.
- countermeasure
- Please replace the disc with one that has been completely appended.
▲ Back | Forward ▼
★ PROGRAMMER'S GUIDE ★ P.S. Write Once
Copyright SEGA ENTERPRISES, LTD. 1997