Return to the upper menu
System Library User's Guide
Table of Contents
Table of contents
Table 1.1 CD block functional classification
Table 2.1 Definition of terms
Table 2.2 List of symbols and abbreviations
Table 3.1 Communication register list
Table 3.2 Data transfer register bit configuration
Table 3.3 Bit configuration of interrupt factor register
Table 3.4 Bit configuration of interrupt register
Table 3.5 MPEG Bit Configuration
Table 3.6 Commands belonging to the command end flag (CD part)
Table 3.7 Handling of exceptional command end flags
Table 3.8 Data transfer error
Table 4.1 CD drive status
Table 4.2 Drive commands
Table 4.3 Error-related status descriptions
Table 4.4 CD drive state transition table
Table 4.5 Operation outside the playback range
Table 5.1 Connector type and connection destination
Table 5.2 Initialization contents of CD block
Table 6.1 Aperture conditions to be set
Table 7.1 Data list
Table 8.1 CD communication interface function list (1)
Table 8.1 CD communication interface function list (2)
Table of Contents
Figure 1.1 CD-related library configuration
Figure 1.2 CD-related system configuration
Figure 2.1 Relationship between track structure and access key
Figure 2.2 Multisession layout
Figure 4.1 CD drive state transition diagram (normal system)
Figure 4.2 CD drive state transition diagram (error system)
Figure 4.3 Sector indicated by current FAD
Figure 4.5 Subcode update and SCDQ flag timing
Figure 5.1 Data flow of the entire CD block
Figure 5.2 Overall configuration of CD block
Figure 5.3 Selector structure (initial state)
Figure 5.4 Schematic diagram of stream selection process
Figure 5.5 Buffer partition structure
Figure 5.6 Copy / move sector data
Figure 5.7 Selector connection by OR condition
Figure 5.8 CD-ROM XA sector format
Figure 6.1 Data structure of file management on CD-ROM (ISO9660)
Figure 6.2 CD block file system structure
Return to the upper menu