Japanese
![]()
★ HARDWARE Manual ★ SMPC User's Manual
SMPC User's Manual Index
[3] [C] [D] [E] [H] [I] [O] [P ] [R] [S ] [T] [V]
- ▲ [3]
- 3-wire handshake method
- ▲ [C]
- COMREG
- ▲ [D]
- DDR1
- DDR2
- DDR function
- DSP
- ▲ [E]
- EXLE1
- EXLE2
- EXLE function
- ▲ [H]
- H-BLANK-IN
- ▲ [I]
- IREG0~IREG6
- IREG0 (peripheral control)
- IREG1 (peripheral control)
- IREG2 (peripheral control)
- How to use the INTBACK command Termination conditions for the INTBACK command
- IOSEL1
- IOSEL2
- IOSEL function
- IREG0~IREG6
- ▲ [O]
- OREG0~OREG31
- ▲ [P]
- P.A.D.
- PC
- PDR1
- PDR2
- PLL
- ▲ [R]
- RTC command
- ▲ [S]
- SCSP SCU SF
- SH-2 interface
- SH-2 interface register
- SH-2 interface register address map
- SH-2 direct mode
- SH-2 direct mode setting flow
- Block diagram of SH-2 direct mode
- SMPC
- SMPC command
- SMPC command list
- SMPC control mode
- Features of SMPC control mode
- Block diagram of SMPC control mode
- Settings for using SMPC control mode
- SMPC system configuration
- SMPC features
- SMPC interrupt ▽ 1 ▽ 2
- S.R.
- SR (peripheral control)
- ▲ [T]
- TH control method
- TH,TR control method
- ▲ [V]
- V-BLANK-IN
- V-BLANK-IN skip function
- V-BLANK-OUT
-
VDP1
VDP2
Hinagana index [A] [Ka] [Sa] [Ta] [ Na] [Ha] [Ma] [Ra]
- ▲ [A]
- Data structure when one side is in 0 byte mode
- ▲ [ka]
- overview
- Extended data size
- calendar clock
- cold reset
- Number of connectors
- Issue command
- Command issue limit
- Command issue timing
- Command issue classification
- How to issue commands
- Continue request
- Points to note when requesting continue
- ▲ [Sa]
- sound cpu
- System configuration
- Horizontal resolution slave SH-2
- All peripheral data acquisition sequence
- ▲ [ta]
- Data size
- ▲ [Na]
- Remaining peripheral data presence/absence bit
- ▲ [ha]
- parallel I/O register
- Parallel I/O register address map
- Initial state when power is turned on
- bit name
- Non-reset system management commands
- break request
- Points to note when requesting a break
- Peripheral data acquisition cancellation sequence due to break request
- peripheral
- Peripheral control status Peripheral data collection time optimization
- Peripheral data structure
- standard format
- Classification A command flow
- Classification B command flow
- Classification C command flow
- Classification D command flow
- Peripheral ID Peripheral Control Mode
- Peripheral type
- Operation overview of peripheral data collection time optimization
- Peripheral data acquisition procedure
- Port 1 Data Port 2 Data Port Status Port Mode
- ▲ [Ma]
- Multi tap ID
- Main CPU
- Megadrive 3 button pat Megadrive 6 button pat
- ▲ [Ra]
- reset button
- Reset button status
- Reset system management commands
![]()
★ HARDWARE Manual ★ SMPC User's Manual
Copyright SEGA ENTERPRISES, LTD., 1997
