Table of Contents

Table

• Table 1.1 Parts classification
• Table 1.2 Screen mode and display range

• Table 2.1 System Register
• Table 2.2 VRAM table

• Table 4.1 System registers
• Table 4.2 Screen mode
• Table 4.3 (a) Example of using frame buffer switching mode (VBE fixed at 0)
• Table 4.3 (b) Example of using frame buffer switching mode (using VBE)
• Table 4.4 Number of rasters and pixels
• Table 4.5 Number of pixels that can be used for V blank erase (when not interlaced)

• Table 5.1 Character pattern table size
• Table 5.2 Gouraud Shading Table
• Table 5.3 Relationship between Gouraud Shading Table Settings and Correction Values ​​

• Table 6.1 Commands
• Table 6.2 Pixel data
• Table 6.3 CMDCOLR
• Table 6.4 Example of relationship between color bank, definition data, and drawing data
• Table 6.5 Relationship between setting value and drawing pixel
• Table 6.6 Correspondence between commands and CMDXA to CMDYD

• Table 7.1 Commands

• Table 8.1 Screen mode
• Table 8.2 Gouraud Shading Table
• Table 8.3 Commands
• Table 8.4 CMDCOLR
• Table 8.5 Relationship between setting value and drawing pixel
• Table 8.6 Correspondence between commands and CMDXA to CMDYD

Figure

• Figure 1.1 System configuration
• Figure 1.2 Standard Sprite
• Figure 1.3 Rectangular Sprite (Specify 2 points)
• Figure 1.4 Rectangular sprite (fixed point specification)
• Figure 1.5 Deformed sprite
• Figure 1.6 Fill-in process
• Figure 1.7 Polygon
• Figure 1.8 Polyline
• Figure 1.9 Line
• Figure 1.10 Color Bank Bit Configuration

• Figure 2.1 Address map
• Figure 2.2 Frame buffer plane

• Figure 3.1 Command Table Flow
• Figure 3.2 Browse table

• Figure 4.1 Displaying single density interlace and double density interlace
• Figure 4.2 Erase Light Area
• Figure 4.3 Processing interruption and current processing table address

• Figure 5.1 Character pattern table example
• Figure 5.2 Color Lookup Table
• Figure 5.3 Lookup table type table relationship
• Figure 5.4 RGB code format
• Figure 5.5 Command Table

• Figure 6.1 Zoom point
• Figure 6.2 Drawing area
• Figure 6.3 Zoom point and drawing area
• Figure 6.4 Character reading direction
• Figure 6.5 High-speed shrink
• Figure 6.6 Pre-clipping
• Figure 6.7 Drawing area
• Figure 6.8 Mesh processing
• Figure 6.9 Line and polyline mesh processing
• Figure 6.10 (a) End code processing (part 1)
• Figure 6.10 (b) End code processing (part 2)
• Figure 6.11 Drawing example of modes 0 and 1
• Figure 6.12 Drawing examples of modes 2, 3, and 4
• Figure 6.13 RGB code format
• Figure 6.14 Example of drawing mode 5
• Figure 6.15 Color calculation example
• Figure 6.16 MSB ON
• Figure 6.17 Color Bank
• Figure 6.18 Color Lookup Table
• Figure 6.19 CMDSIZE

• Figure 7.1 System Clipping
• Figure 7.2 User Clipping Settings
• Figure 7.3 User Clipping

• Figure 8.1 Example of character pattern table
• Figure 8.2 Color Lookup Table
• Figure 8.3 Command table